How Extreme Winter Weather Impacts Reliability

When outdoor temperatures drop, our electricity use increases. That is because we are doing more activities inside and our heating systems are running longer and more often to counteract colder outdoor temps. Factor in that we all tend to use electricity at the same times -- in the morning and early evenings -- and that equals a lot of strain on our electric grid.

At Wayne-White Counties Electric Cooperative, we work closely with Hoosier Energy, our generation and transmission (G&T) cooperative in resource and infrastructure planning to ensure you have the power you need whenever you flip a switch, but the electric grid is much larger than your local co-op and G&T.

Wayne-White Electric and Hoosier Energy take proactive steps to create a resilient portion of the grid and ensure electric reliability in extreme weather, including regular system maintenance, grid modernization efforts and disaster response planning; but it takes everyone to keep the grid reliable.

To help keep the heat on for you, your family and neighbors, here are a few things you can do to relieve pressure on the grid (and save a little money along the way):

  • Select the lowest comfortable thermostat setting and turn it down several degrees whenever possible. Your heating system must run longer to make up the difference between the thermostat temp and the outdoor temp.
    • Pro Tip: Seal air leaks around windows and exterior doors with caulk and weatherstripping. Air leaks and drafts cause your heating system to work harder than necessary.
  • Stagger your use of major appliances such as dishwashers, ovens and dryers.
    • Pro Tip: Start the dishwasher before you go to bed and use smaller countertop appliances like slow cookers and air fryers to save energy.
  • Ensure that your heating system is optimized for efficiency with regular maintenance and proper insulation.
    • Pro Tip: Make sure your furnace filter is not clogged and dirty. Replace it as needed.
  • When possible, use cold water to reduce water heating costs.
    • Pro Tip: Setting your water heater thermostat to 120° can help you save energy and reduce mineral buildup and corrosion in your water heater and pipes.
  • Unplug devices when not in use to eliminate unnecessary energy use. Even when turned off, electronics in standby mode consume energy.
    • Pro Tip: Plug devices into a power strip so you can turn them all off at once with the push of a button.

As we face the challenges posed by winter weather, understanding its impact on energy demand is crucial for maintaining a reliable power supply. By adopting energy conservation practices during periods of extreme cold, not only can you save money on your electric bills, but you can also each contribute to the resilience of the power grid, keeping our local communities warm and connected.